Home
About Us
Products
Feedback
Contact Us
 
Products -> Falcon gas cutting & welding equipments
 
FALCON welding and cutting equipments
FALCON welding & cutting equipments are manufactured under rigid quality inspections to conform the relevant specifications to ensure the best quality to the customers.
Our technical team keep the watch at every stage to find our any error before dispatch. Every employee on line of production and CEO are always at work to improve the design and work standards to deliver the best quality.
FALCON is accepted name for outstanding quality of their products.
Regulator bodies are machined from high quality of brass bar stock.
Regulators are color coded for convenient gas identification and are easy to read.
Torches for safe and leak free operations.
Cutting tips / cutting nozzles are of superior flame stability.
 
MANUAL CUTTING & WELDING BLOW PIPES:
Simple, rugged and durable in design.
Easy to use, economical, safe & dependable.
Meets the requirement of IS-7653
FALCON Welding blow pipes are designed for welding metals for indoor and outdoor workshops. It is used for general heating also. It is supplied in two models heavy duty and light duty which produces effective welding flame with cone.
Heavy duty high pressure blow pipe is provided with swaged copper tips of sizes 2, 3, 7, 13, 25 and 30 to cover M.S. welding from 1.25 mm to 12.2 mm thickness. The high duty low pressure blow pipe id provided with three swaged copper wire tips of sizes 1, 3 & 7 for M.S. welding from 1.00 mm to 4.00 mm thickness.
Extra tips can be supplied on order.
 

FALCON Cutting pipe is designed for safe and reliable working for low pressure system. The joints are silver soldered in 90 o and 75 o heads in brass. 3/64? nozzle for cutting up to 50mm M.S. and 1/16? for cutting up to 100mm M.S. is provided with blow pipe.

Cuts steel up to size of 300mm thickness.
 
OPERATING DATA FOR MILD STEEL WELDING
TIP / NOZZLE SIZE PLATE THICKNESS TO WELD PRESSURE OF ACETYLENE
MM INCHES Kg/cm 2 Lbs/inch 2
2 1.25 3/64" 0.14 2
3 1.50 1/16" 0.14 2
5 2.50 3/32" 0.21 3
7 3.15 1/8" 0.21 3
10 4.00 5/32" 0.28 4
13 5.00 3/16" 0.28 4
18 6.30 1/4" 0.28 4
25 8.00 5/16" 0.42 6
35 10.00 3/8" 0.42 6
45 12.50 1/2" 0.56 8
55 20.4 to 26 3/4" + 1" and over 0.70 10
70 -- -- 0.70 10
90 For Heating 0.70 10
 
OPERATING DATA FOR MILD STEEL CUTTING
SIZE OF NOZZLE TYPE 'A' M.S. THICKNESS TO BE CUT PRESSURE OF OXYGEN
MM INCHES MM Kg/cm 2
0.72 3/64" 1 To 12 1.4
1.19 3/64" 1 To 25 3
1.59 1/16" 50 4
1.59 1/16" 75 4
1.59 1/16" 100 5
1.98 5/64" 150 5.5
2.38 3/32" 200 7.5
2.78 7/64" 250 8
3.17 1/8" 300 8
 
OXY-ACETYLENE SINGLE & DOUBLE STAGE PRESSURE REGULATORS:

Resistant to chemical, mechanical and thermal action of the gases.

Meets the requirement of IS-6901.
 

FALCON Single Stage Regulators are supplied with single pressure gauges as well as two pressure gauges.

 
FALCON Two Stage Regulators are designed to give the steady flow of gas at the outlet end irrespective of the volume of gas in the cylinder, the reduction in the pressure from the cylinder being achieved in two stages. There are two gauges one to indicate outlet pressure and the other to indicate inlet pressure.
 
Type of the Regulators Maximum inlet Pressure Maximum Discharge Qmaxm3/hr Standard Discharge Q1m3/hr Coefficient of Pressure
R
Irregularity Factor
I
P1 Kg/cm2 P2 Kg/cm2
Oxygen 200 8 25 ± 25% 18 ± 25% 0.3 max -0.3≤:≤+0.3
Acetylene 18 1.5 16 ± 25% 6 ± 25% 0.3 max -0.3≤:≤+0.3
Nitrogen 200 1.5 6.5 ± 25% 4 ± 25% 0.3 max -0.3≤:≤+0.3
Argon 200 1.5 5.75 ± 25% 3.5 ± 25% 0.3 max -0.3≤:≤+0.3
Hydrogen 200 6 92.74±25% 75.28±25% 0.3 max -0.3≤:≤+0.3
 
 
Home - About Us - Products - Feedback - Contact Us - Sitemap
©2005 Satkul Enterprises ltd. All rights reserved.
Powered by Bitscape